Front panel components

Front panel display components
Item Description Function
1 UID / LED button Toggles the frame UID on or off. When turned on, the UID LED on the active frame link module (FLM) also turns on. This allows identification of the frame from either the front or rear and identifies the active FLM.
2 Frame Health LED

Indicates the highest severity health status of all components within the frame.

  • Solid green—Normal operation

  • Flashing amber—Warning

  • Flashing red—Critical error

To resolve critical errors and warnings, connect to HPE OneView or to the HPE Synergy Console.

3 Laptop port

Provides single laptop access to the frame link module using an RJ-45 Ethernet 100BASE-TX connection.

4 Monitor port Provides connectivity for a monitor or an active monitor port adapter to access the HPE Synergy Console.
5 Reset button Provides two functions:

  • Resets the Active frame link module - momentary press.

  • Factory resets both frame link modules - press and hold until UID LED flashes blue.

NOTE:

The reset button does not reset any other component in the frame.

6 USB Provides a connection for supported USB devices such as a keyboard or mouse for HPE Synergy Console use. To connect multiple devices, a USB hub (not included) is required.