Install the air baffle

CAUTION: For proper cooling, do not operate the server without the access panel, baffles, expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize the amount of time the access panel is open.

Procedure

Install the air baffle:
1. Insert the tabs on the baffle into the slots on the rear chassis.
2. Press the front end of the baffle into the chassis.
Install the access panel.
Install the front bezel.
Do one of the following:
- If the server is in tower mode: Position the tower server for operation.
- If the server is in rack mode: Install the server on the tray.
Connect all peripheral cables to the server.
Connect the power cords:
1. Connect each power cord to the server.
2. Connect each power cord to the power source.
Power up the server.