Removing and replacing the system battery

Procedure
  1. Power down the server.
  2. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  3. Disconnect all peripheral cables from the server.
  4. Do one of the following:
  5. Remove the front bezel.
  6. Remove the access panel.
  7. If installed, remove the air baffle.
  8. Locate the battery on the system board.
  9. Remove the system battery:
    1. Use a small flat-bladed, nonconductive tool to press the battery latch (callout 1).
    2. Remove the system battery from the socket (callout 2).

      Removing the system battery
  10. Install the system battery:
    1. With the side of the battery showing the "+" sign facing up, insert the battery into the socket (callout 1).
    2. Press the system battery down until it clicks into place (callout 2).

    Installing the system battery
  11. Install the access panel.
  12. Install the front bezel.
  13. Do one of the following:
  14. Connect all peripheral cables to the server.
  15. Connect the power cords:
    1. Connect each power cord to the server.
    2. Connect each power cord to the power source.
  16. Power up the server.
  17. Properly dispose of the old battery.

    For more information about battery replacement or proper disposal, contact an authorized reseller or an authorized service provider.