Restoring the HPE StoreEasy system using a USB drive

Prerequisites

  • Disconnect any external storage.

  • Access to a USB drive with the HPE StoreEasy system recovery image.

Procedure
  1. Do one of the following:
    1. For direct access, attach a KVM to the StoreEasy system and insert the bootable USB drive that contains the system recovery image into the HPE StoreEasy system.
    2. For remote management access, connect to the HPE StoreEasy system using iLO from a client PC. Insert the bootable USB drive that contains the system recovery image into the HPE StoreEasy system.
  2. Reboot the HPEStoreEasy system and, during the boot, press F11 key to manually select the device that has the recovery media.
  3. Select HPE StoreEasy System Recovery.
    IMPORTANT: Do not interrupt the recovery process. The system automatically reboots when the system recovery is complete.
  4. Remove the USB flash drive from the HPE StoreEasy system.
  5. Reconnect any external storage that was detached, and then reboot the HPE StoreEasy system.