Intel VROC GUI components

The home page is divided into several window panes; each used to convey information to the user depending in the selection made.

  1. The “Devices” pane (to the left) shows the devices that are connected to the controller. This will be further broken down into sections based on Intel VROC (SATA RAID) Controller, Intel VROC Controller, or Intel virtual RAID controller (for Intel VROC (NonVMD RAID)) should drives be attached within those categories. If the controller is enabled, but there are no associated drives, that controller has a dot rather than an arrow next to it. (The SATA controller has no devices in the image below.) Order of precedence will be granted to SATA controllers with devices attached.

  2. The “Volumes” pane (in the middle) shows the RAID Arrays and RAID Volumes being managed by Intel VROC family of products.

  3. The “Properties” pane (to the right) shows the Properties of the component that is high-lighted in either the “Devices” pane or the “Volumes” pane.

  4. The “Information” pane (at the bottom) shows information relative to the current status of the host controller, the devices attached to it or the Array and Volume.

NOTE:

The arrow is pointing to a help menu option that will explain, in depth, additional information regarding the disk properties listed and what each item listed, within the Disk Properties pane, represents.