Enabling AlertMail

Prerequisites

  • Configure iLO Settings privilege

  • For configurations with Enable SMTP Authentication enabled, you have the user name and password of an email account on the SMTP Server.

  • For configurations with Enable SMTP Secure Connection (SSL/TLS) enabled, SSL/TLS is enabled on the server.

  • If you use a public or ISP SMTP server, make sure that the email addresses you will use for the recipient addresses are configured to allow less secure applications.

Procedure
  1. Click Management in the navigation tree, and then click the AlertMail tab.
  2. Set the Enable iLO AlertMail option to enabled.
  3. Enter the following information:

    • Recipient Email Address

    • Sender Domain or Email Address

    • SMTP Port

      If the Enable SMTP Secure Connection (SSL/TLS) option will be used, Hewlett Packard Enterprise recommends setting this value to 587.

    • SMTP Server

  4. To send AlertMail messages over a secure connection, enable the Enable SMTP Secure Connection (SSL/TLS) option.
  5. To authenticate the SMTP connection with an email account user name and password, enable the Enable SMTP Authentication option.
  6. If Enable SMTP Secure Connection (SSL/TLS) and Enable SMTP Authentication are enabled:
    1. Enter the user name for an email account on the configured SMTP server in the SMTP Username box.
    2. Select the Change SMTP Password check box.
    3. Enter the password for the email account user name in the New SMTP Password and Confirm SMTP Password boxes.
  7. To save the changes, click Apply.
  8. (Optional) To send a test message to the configured email addresses, click Send Test AlertMail.

    This button is available only when AlertMail is enabled.

    The test AlertMail is initiated.

  9. (Optional) If you sent a test message, check the iLO event log to confirm that it was sent successfully.