By default, a single logical interconnect group containing all the interconnects in the enclosure is automatically created when you add an enclosure. If you want to create multiple logical interconnects, create the logical interconnect groups first with the interconnects you want in each logical interconnect.
If you want to use an existing logical interconnect group as a template, copy the logical interconnect group rather than creating one.
Prerequisites
Privileges:
Network administrator or
Infrastructure administrator.
Procedure
-
From the main menu, select
, and then do one of the following:
-
Enter a name for the logical interconnect group.
-
Click the
Edit icon of the internal network area in the graphical view.
-
Click
Add networks to select from available networks.
-
Click
OK when you are finished adding the internal networks.
-
Click
Add uplink set.
-
Enter the data requested on the screen for each uplink set you want to create.
-
Click
Create to finish, or click
Create + to create additional uplink sets.
-
Optional: Scroll down and, if necessary, change the interconnect settings.
Any logical interconnects created from the interconnect group inherit these settings.
-
Optional: Change the SNMP settings.
Any logical interconnects created from the interconnect group inherit these settings.
-
Optional: Change the Quality of Service (QoS) settings.
-
Click
Create to finish, or click
Create + to create additional logical interconnect groups.
-
To verify that the logical interconnect group was created, locate the group in the details pane.
-
Optional: Select the logical interconnect group to edit, and then select
to change the utilization sampling settings, if necessary.
These settings are used in data collection for the utilization graphs displayed on the
Interconnects screen.
-
Click
OK to apply any changes.
-
To verify the changes, locate them in the
General view.
