Cannot add server for a directory service

Symptom

You cannot configure a server for the directory service.

Solution 1
Cause

The appliance lost connection with the directory service, but that connection was lost.

Action
  1. Verify that the settings for the directory service host are accurate.
  2. Verify that the settings for the directory service host are accurate.
  3. Verify that the correct port is used for the directory service.
  4. Verify that the port (default port 636) you are using for communication is not blocked by any firewalls.

    See Firewall ports required for HPE OneView.

  5. Locally run the ping command on the directory service host’s IP address or host name to determine if it is on-line.
  6. Ping a host name or IP address on the directory service host’s IP address or host name to determine if it is on-line.
  7. Verify that the appliance network is operating correctly.
  8. If the appliance is hosted on a virtual machine, determine that it is functioning properly and there are enough resources.
Solution 2
Cause

There is an authentication error when logging in to the server for the directory service.

Action
  1. Verify that the login name and password are accurate.
  2. Reacquire and install the directory service host certificate.
  3. Contact the directory service provider to ensure that the credentials are accurate.