Front panel LEDs and buttons
The drive configuration will vary depending on the drive kit.
| Item | Description | Status |
|---|---|---|
| 1 | UID LED | Solid blue = Activated Flashing blue (1 Hz/cycle per sec) = Remote management or firmware upgrade in progress Off = Deactivated |
| 2 | Health status LED | Solid green = Normal Flashing green (1 Hz/cycle per sec) = iLO is rebooting. Flashing amber = System degraded Flashing red (1 Hz/cycle per sec) = System critical |
| 3 | Mezzanine NIC status LED | Solid green= Link on any Mezzanine NIC Flashing green= Activity on any Mezzanine NIC Off = No link or activity on any Mezzanine NIC |
| 4 | Power On/Standby button and system power LED | Solid green = System on Flashing green (1 Hz/cycle per sec) = Performing power on sequence Solid amber = System in standby Off = No power present
NOTE:
If all other LEDs are off, no compute module power is present (facility power is not present, power cord is not attached, power supplies are not installed or a power supply failure has occurred). If the health LED is flashing green while the system power LED is off, the Power On/Standby button service is initializing or an iLO reboot is in progress. |
| 5 | Drive cage | This release provides removable drive kit options for two, four drive bays or for a single GPU. |
| 6 | Handle release latch | The handle release latch for the compute module. |
| 7 | USB 3.0 connection | The external USB 3.0 connector located behind the serial pull tab. |
| 8 | iLO USB connection | The external USB iLO Service Port (169.254.1.2) located behind the serial label pull tab. |