| Remote connection | These fields display when the downlink port is connected to an Ethernet network.
| Type | Port type for remote connection, can be
Ethernet,
External, or
Unknown.
| | Port type | Port type of the remote connection. For example,
Local,
Ethernet, or
Unknown.
| | Port ID | Description of the server port. For example,
Bay 1,
Mezzanine Slot 3,
Port 1
| | Port description | Detailed description of the port type.
| | Address type | Description of the type of address displayed.
| | Address | IP address of the interconnect to which the downlink port is connected.
| | System name | Symbolic name of the device set by the network administrator.
| | System description | Vendor-generated description of the device.
| | System capabilities | Configuration of the port on the device, can be
bridge,
trunk,
bridge and trunk, or
bridge, router.
|
|
| Statistics | These fields display when a downlink port is on an interconnect that supports statistical data collection.
Port statistics data is refreshed at the same frequency as the interval between samples, which you can set using the
Utilization Sampling settings on the
Logical Interconnects or the
Logical Interconnect Groups screen.
| Transmitted errors | Number of errors that the port has transmitted since the connection was established or the last time the port counters were cleared.
| | Received errors | Number of errors that the port has received since the connection was established or the last time the port counters were cleared.
| | Bit Transfer Rate graph | Displays the bit transfer rate (transmitted and received) of the downlink port over time, and the average bit transfer rate.
You can change the sample collection rate using the
Utilization Sampling settings on the
Logical Interconnects or the
Logical Interconnect Groups screen.
| | Packet Transfer Rate graph | Displays the packet transfer rate (transmitted and received) of the downlink port over time, and the average packet transfer rate.
You can change the sample collection rate using the
Utilization Sampling settings on the
Logical Interconnects or the
Logical Interconnect Groups screen.
|
|
| Advanced Statistics | These fields display port statistics like frame details, CRC errors, and dropped frames. In addition to these counters,
pfcRxPauseFrameCounter and
pfcTxPauseFrameCounter are being added. These features are available on the
HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy and
HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy interconnects.
pfcRxPauseFrameCounter
| Rx PFC count: The total received Priority Pause frame count.
| pfcTxPauseFrameCounter
| Tx PFC count: The total transmitted Priority Pause frame count
|
|
| Quality of Service Statistics | Downlink port quality of service statistics.
For information about the statistics, see the HPE Virtual
Connect for c-Class BladeSystem User Guide at the Hewlett Packard Enterprise Support Center. |
