Edit access for an SNMP manager

Changes can be made to the SNMP manager IP address.

Prerequisites

Privileges: Infrastructure administrator or Network administrator

Procedure
  1. From the main menu, select NETWORKING > Logical Interconnects or Logical Interconnect Groups, select the logical interconnect, and then do one of the following:
    1. Select Actions > Edit.
    2. Click the Edit icon.
  2. In the SNMP view, click the Edit icon in the SNMP access row for the address to edit.
  3. Make any changes to the IP address.
    NOTE:

    Both IPv4 and IPv6 addresses are supported.

  4. Click OK to apply your SNMP changes.
  5. Click OK to update the logical interconnect or logical interconnect group.
  6. To verify that the specified SNMP access was changed, locate the SNMP access information in the SNMP view.