Installing the DIMM baffle

Procedure
  1. Install the DIMM baffle.
    Installing the DIMM baffle
  2. If a SLIM/SAS cable is present, attach the SLIM/SAS cable to the DIMM baffle. Attach the SLIM/SAS cable to the Port 3i connector if it is not already attached.
    Attaching the SLIM/SAS cable to the DIMM baffle.
  3. If a SLIM/SAS cable is present, attach the SLIM/SAS cable to the drive assembly.
    Attaching the SLIM/SAS cable to the drive.
  4. If the energy pack was removed, install the energy battery pack into the DIMM baffle.
    Installing the energy battery pack into the DIMM baffle.
  5. If the plug for the energy pack was removed, plug in the cable for the energy pack.
    Plug in the cable to the energy pack
    NOTE: The port location for the energy pack has changed from previous releases. Plug the energy pack into the port located under the mezzanine option card.
  6. If the mezzanine option card was previously removed, install the mezzanine option card.
    Installing the mezzanine option card.
  7. Install the access panel.
  8. Install the compute module.