Networks
| Add the Fibre Channel direct attach networks.
| |
| Logical Interconnect Groups | Create a logical interconnect group that defines the uplink sets for the direct attach network connections.
| Choose a name for the logical interconnect group that helps you distinguish logical interconnect groups that have connections to direct attach Fibre Channel networks from other logical interconnect groups.
You add uplink sets as part of creating the logical interconnect group. Ensure that the uplink sets use the uplink ports on the enclosure that are physically connected to the
HPE 3PAR StoreServ Storage.
|
| Enclosure Groups | Create an enclosure group.
| |
| Enclosures | Add the enclosure.
| Select
Add enclosure for management.
Select the enclosure group that you added in the preceding step.
Select a firmware baseline and anHPE OneView Advanced licensing option.
|
| Server Profiles | Do one of the following:
Create a server profile and assign it to the server hardware.
Copy a server profile, edit it as necessary, and then assign it to the server hardware.
After you configure the
HPE 3PAR StoreServ Storage, power on the server hardware.
| For a server blade to connect to the
HPE 3PAR StoreServ Storage, it must have a server profile assigned to it, and that server profile must include at least one connection to the direct attach Fibre Channel network that connects to the storage system.
For example, if the networks you added are
Direct A and
Direct B, ensure that the server profile has one connection to the
Direct A network and one connection to the
Direct B network.
You enable SAN storage through the server profile, in addition to other configuration settings. You must add storage systems, add storage volumes, and then attach to volumes when you create the profile.
|
