Installed firmware and driver versions

This section provides information about the version of firmware and driver components installed on the server hardware.

  • The installed driver versions of the components are displayed for Gen8, Gen9, and Gen10 servers. If the iLO 4 firmware version is less than 2.55 for Gen8 and Gen9 servers, the driver inventory is not displayed.

  • If the iLO firmware version is less than 2.30, only iLO, ROM, and Intelligent Provisioning versions are displayed for Gen8 and Gen9 servers.

  • The versions that cannot be read from server hardware display as unknown.

  • When the option card does not support UEFI protocol, the version displays as unknown.

  • Agentless Management Service (AMS) must be installed to get the complete driver inventory of the server.

  • For Gen8 servers when Agentless Management Service (AMS) is not installed, the version displays as unknown.

  • The firmware versions on hardware components that do not have UEFI-compatible firmware and Management Component Transport Protocol (MCTP) support display as unknown.

  • When the iLO firmware is updated outside of HPE OneView, a server hardware refresh is required to update the current firmware inventory.