Installing the Top Plastic Guard on the Fuse Panel

Procedure
  1. Place the plastic guard over the cable management tray so that the guard covers the terminal blocks and the cables are routed through the cutouts in the guard. Position the guard so that the screw holes in the tabs on fuse panel support brackets and the screw holes in plastic guard are aligned (Figure 2: Fuse Panel Top Plastic Guard and Mounting Screws). The plastic guard has cutouts for each of the four power input cables and larger cutouts for the output cables.
  2. Insert and tighten the two M4 screws using a T-20 Torx driver.