Installing a DIMM

The server supports up to 32 DIMMs.

Prerequisites

Before installing this option, be sure you have the following:

The components included with the hardware option kit.

For more information on specific options, see the compute module QuickSpecs on the Hewlett Packard Enterprise website.

Procedure
  1. Power down the compute module.
  2. Remove the compute module.
  3. Place the compute module on a flat, level work surface.
  4. Remove the access panel.
  5. Flip over the DIMM baffle.
  6. Open the DIMM slot latches.
  7. Install the DIMM.
    Installing a DIMM
  8. Install the DIMM baffle.
  9. Install the access panel.
  10. Install the compute module.
  11. Power up the compute module.

Use the BIOS/Platform Configuration (RBSU) in the UEFI System Utilities to configure the memory mode.